CS/UPC to LC/Uniboot UPC With Push/Pull Tabs Duplex 9/125μm Single Mode Fiber Optic Patch Cable

Short Description:

Senko CS EZ-Flip is a Very Small Form Factor (VSFF) connector and is ideal for space-saving solutions. The CS EZ-Flip connector allows you to double the density in patch panels compared to an LC duplex. The polarity switching features allows for quick reversal of the connector polarity without the need for connector re-termination. The unique push-pull tab allows for better usability in high-density applications.

Senko CS™ connector is designed for next generation 200/400G transceiver QSFP-DD and OSFP, meeting the requirement for CWDM4, FR4, LR4 and SR2, which is optimized as a robust higher density replacement over the duplex LC connector in both the rack and structured cabling environments.

Senko CS™-LC uniboot duplex single mode fiber optic patch cables are available to interconnect or cross connect fiber networks. It is also backward compatible with 40Gb and 100Gb networks, so you can future-proof your current application for an eventual upgrade to 400Gb.

The connector accepts up to 2.0/3.0mm duplex fiber.

Send email to us

Product Detail

Product Tags

Product Description

The connector accepts up to 2.0/3.0mm duplex fiber.

Product Specification

Connector Type	Senko CS™ to LC/Uniboot	Polish Type	UPC to UPC
Fiber Mode	OS2 9/125μm	Wavelength	1310/1550nm
Fiber Grade	G.657.A1 Fiber(Compatible with G.652.D)	Minimum Bend Radius	10mm
Attenuation at 1310 nm	0.4 dB/km	Attenuation at 1550 nm	0.22 dB/km
Insertion Loss	CS™≤0.2dB, LC≤0.2dB	Return Loss	≥50dB
Fiber Count	Duplex	Cable Diameter	2.0mm/3.0mm
Cable Jacket	PVC/OFNR/LSZH/ Plenum	Polarity	A (Tx) to B (Rx)
Operating Temperature	-10~70°C	Storage Temperature	-20~70°C

Product Features

CS® Connector

• Serial, Parallel and WDM optical cabling schemes

• Central Network Point of Administration cross-connect

• Trunk cabling to Zone Cabinets, switches and servers

• CS/CS trunk cables

• MPO/MPO trunk cables

• CS/MPO trunk cables

• CS/CS jumpers 2.0/3.0mm O.D.

• CS/LC jumpers 2.0/3.0mm O.D.

• Patch panel channel counts in 1RU - 128Ch, 144Ch & 160Ch

matches up to either 32 channel and 36 channel port

counts

• 10G, 40G, 100G, 200G & 400

●Each cable 100% tested for low insertion loss and Return loss

●Customized lengths, Cable Diameter and Cable colors available

●PVC, OFNR, Plenum(OFNP) and Low-Smoke, Zero Halogen(LSZH)

Rated options

Senko CS Connector

The CS connector is Smaller then LC Duplex connector and is ideal for space-saving solutions.

CS Switchable polarity

LC/Uniboot with Push/Pull Tabs Connector

The LC/uniboot Connector design improves the effectiveness and flexibility of cable management while saving a lot of space.

LC/Uniboot Switchable polarity

Optimized for 200/400G New Generation Data Center

The smaller connector footprint of CS™ connectors enables two duplexes in a single QSFP-DD/OSFP transceiver, addressing a critical industry challenge of increasing port density for 400GbE optics.