Wholesale Multiode Simplex Fiber Optic Patch Cord Factories – LC/SC/FC/ST/E2000/MTRJ Multimode Duplex OM1/OM2 Optic Patch Cord – RAISE
Wholesale Multiode Simplex Fiber Optic Patch Cord Factories – LC/SC/FC/ST/E2000/MTRJ Multimode Duplex OM1/OM2 Optic Patch Cord – RAISE Detail:
Product Description
Fiber patch cables are the thin, flexible fibers of glass that carry data, telephone conversations and emails high speed all over the world in a matter of seconds with much less interference than copper patch lead. Fiber Optic cables need less amplification to boost signals so they travel better over longer distances.
The OM2 Fiber cable is a Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than OM1 62.5/125 fiber. Specifically designed for use with today’s narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular OM1/OM2 multimode fiber, immune to electrical interference.
Product Specification
Connector Type | LC/SC/FC/ST/E2000/MTRJ | ||
Fiber Count | Duplex | Fiber Mode | OM1 62.5/125μm or OM2 50/125μm |
Wavelength | 850/1300nm | Cable Color | Orange Or Customized |
Insertion Loss | ≤0.3dB | Return Loss | ≥30dB |
Min. Bend Radius (Fiber Core) | 15mm | Min. Bend Radius (Fiber Cable) | 20D/10D (Dynamic/Static) |
Attenuation at 850nm | 3.0 dB/km | Attenuation at 1300nm | 1.0 dB/km |
Cable Jacket | LSZH, PVC (OFNR), Plenum (OFNP) | Cable Diameter | 1.6mm, 1.8mm, 2.0mm, 3.0mm |
Polarity | A(Tx) to B(Rx) | Operating Temperature | -20~70°C |
Product Features
● Used to connect equipment that utilizes LC/SC/FC/ST/MTRJ/E2000 style connectors on each end and Manufactured from Multimode OM1/OM2 duplex fiber cable
● Connectors can choose a PC polish or UPC polish
● Each cable 100% tested for low insertion loss and Return loss
● Customized lengths, Cable Diameter and Cable colors available
● OFNR (PVC), Plenum(OFNP) and Low-Smoke, Zero Halogen(LSZH)
● Reduced Insertion Loss by up to 50%
● High Durability
● High Temperature Stability
● Good Exchangeability
● High Density design cuts down on installation costs
LC to LC Multimode Duplex OM1/OM2
LC to SC Multimode Duplex OM1/OM2
SC to SC Multimode Duplex OM1/OM2
SC to FC Multimode Duplex OM1/OM2
LC to FC Multimode Duplex OM1/OM2
SC to ST Multimode Duplex OM1/OM2
LC to ST Multimode Duplex OM1/OM2
ST to ST Multimode Duplex OM1/OM2
MTRJ Multimode Duplex OM1/OM2
E2000 Multimode Duplex OM1/OM2
Industry Standard Flammability Rating OFNR (Riser) Jacket Fiber Optic Cable
The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.
Zirconia Ceramic Ferrule Optimum IL and RL
2.0mm Cable Boot, Provides Maximum Protection
Printing helps clarify and recognize different cables
Smart & Reliable – Bendable Optical Fiber
The industry standard duplex fiber connector meets EIA/TIA 604-2 with ceramic ferrule for high speed cabling networks.
Bend Insensitive Fiber
BIF Cable can be stapled and bent around corners without sacrificing performance.
7.5mm Minimum Bend Radius
The bend performance improves duct utilization, enabling smaller enclosures.
Zirconia Ceramic Ferrule
Optimum IL and RL ensure stable signal transmission, protecting your network safety.
Various Choice to Meet Your Different Needs
1. Custom Connector
2. Custom Cable Jacket
3. Custom Cable Diameter
OM1 VS OM2
● OM1 cable typically comes with an orange jacket and has a core size of 62.5 micrometers (µm). It can support 10 Gigabit Ethernet at lengths up 33 meters. It is most commonly used for 100 Megabit Ethernet applications.
● OM2 also has a suggested jacket color of orange. Its core size is 50µm instead of 62.5µm. It supports 10 Gigabit Ethernet at lengths up to 82 meters but is more commonly used for 1 Gigabit Ethernet applications.
Diameter: The core diameter of OM1 is 62.5 µm, The core diameter of OM2 is 50 µm
Jacket Color: OM1 and OM2 MMF are generally defined by an Orange jacket.
Optical Source: OM1 and OM2 commonly use LED light source.
Bandwidth: At 850 nm the minimal modal bandwidth of OM1 is 200MHz*km, of OM2 is 500MHz*km
How to choose the Multimode Fiber?
Multimode fibers are able to transmit different distance ranges at various data rate. You can choose the most suited one according to your actual application. The max multimode fiber distance comparison at different data rate is specified below.
Fiber Optic Cable Type | Fiber Cable Distance | |||
Fast Ethernet 100BA SE-FX | 1Gb Ethernet 1000BASE-SX | 1Gb Ethernet 1000BA SE-LX | ||
Multimode fiber | OM1 | 200m | 275m | 550m (mode conditioning patch cable required) |
OM2 | 200m | 550m |
Customized Connector Type: LC/SC/FC/ST/E2000/MTRJ
LC connectors:
These connectors are ideal for use in high-density applications due to their small size and feature a pull-proof design. They are available in both simplex and duplex versions with a 1.25mm zirconia ferrule. Additionally LC connectors also make use of an specialized latch mechanism in order to provide stability within rack moum.
SC connectors:
SC Connectors are non-optical disconnect connectors with a 2.5mm pre-radius-ed zirconia ferrule. They are ideal for quick patching of cables into rack or wall mounts due to their push-pull esign. Available in simplex and duplex with a reusable duplex holding clip to allow for duplex connections.
FC connectors:
They feature a durable threaded coupling and are best suited for use within telecoms applicationsand make use of non-optical disconnect.
ST connectors:
ST connectors or Straight Tip connectos make use of a semi-unique bayonet connection with a 2.5mm ferrule. ST’s are great fiber optic connectors for field installation due to their reliability and durability. They are available in both simplex and and duplex.
Performance Test
Production Pictures
Factory Pictures
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Wholesale Multiode Simplex Fiber Optic Patch Cord Factories – LC/SC/FC/ST/E2000/MTRJ Multimode Duplex OM1/OM2 Optic Patch Cord – RAISE , The product will supply to all over the world, such as: Romania, Argentina, Costa Rica, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we are going to be pleased to serve you.
By Alex from Netherlands - 2018.07.26 16:51
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Matthew from Paris - 2017.09.29 11:19